• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

BRP Logo Removal

daddydarko

New member
I saw a few Spyders that had remove the BRP logo just below the hood. Are these glued on? Anyone here removed their's?
 
daddydarko said:
I saw a few Spyders that had remove the BRP logo just below the hood. Are these glued on? Anyone here removed theirs?
I used a hair dryer, heat them up a little and they pull right off. Then a WD 40 for the very little bit that may not come off. Mine came off and let a small spot glue on only place side and it came right off with the WD 40.



john Spyder # 114
 
spyder114 said:
I used a hair dryer, heat them up a little and they pull right off. Then a WD 40 for the very little bit that may not come off. Mine came off and let a small spot glue on only place side and it came right off with the WD 40.



john Spyder # 114

I did what John did, but I didn't bother with the blowdryer: A clean fingernail, steady pressure pulling, and patience, and they both "Can-Am" stickers came off!

(That's probably why there aren't many pics of our Spyder in all the Homecoming shots--we didn't advertise for Can-Am ! ;D )

On a related note, does anyone know where to get new "Spyder" stickers? I was gonna throw one on the rear fender and a couple on my truck. I just like the "Spyder" logo, but not the "Can-Am" one.

I haven't checked the parts list yet, it may be there...
 
Back
Top