Heim Joint Link Set Installation Instructions

[BajaRon]

If you have ordered a set of my Billet Aluminum Heim Joint Links, and you would like written installation instructions let me know. I will email you a set or mail a set if you prefer.

These are very easy to install. But at the same time it never hurts to be prepared. I worked up install instructions for these little beauties today so they are Hot off the Presses!

 

[Magdave]

Those look pretty Ron :thumbup:

 

[Cruzr Joe]

If you have ordered a set of my Billet Aluminum Heim Joint Links, and you would like written installation instructions let me know. I will email you a set or mail a set if you prefer.

These are very easy to install. But at the same time it never hurts to be prepared. I worked up install instructions for these little beauties today so they are Hot off the Presses!

Had them installed today on my 14 RTS, they look and appear to work good, also installed the sway bar (actualy Spyderpops installed both)

Cruzr Joe


Sent from my iPad using Tapatalk HD

 

[Chupaca]

Bummer..!!

those are soo! Much nicer than the original ones you sent me..price you pay for being first...:roflblack:

 

[Dan McNally]

Sending a PM with my email address . . . thanks!

 

[JkRbbt]

Oh, sure! After I put a set on my '13, now you are AUTOGRAPHING 'em!!

 

[BajaRon]

Oh, sure! After I put a set on my '13, now you are AUTOGRAPHING 'em!!

Not to worry, they are required to grind off the logo before they install them... :thumbup:

Had them installed today on my 14 RTS, they look and appear to work good, also installed the sway bar (actualy Spyderpops installed both)

Cruzr Joe

Let us know what you think of the sway bar on your new 2014 RT!

If you like it then post it on the forum. If you don't, make sure you don't tell anyone! :roflblack:

 

[Magdave]

Did you make a change for 2014? I though the 13 and 14 were interchangable:dontknow:

 

[BajaRon]

Did you make a change for 2014? I though the 13 and 14 were interchangable:dontknow:

Links are the same, all years, all models. The Sway Bars changed in 2013 and are the same for 2014 also.

 

[Cruzr Joe]

The sway bar made an instant change in the "lean/sway" of the front end, more stable and better cornering. Keeping the stock shocks, no need to upgrade IMHO.

Only problem is the name is hard to grind off, LOL (just kiddin)

Cruzr Joe


Sent from my iPad using Tapatalk HD

 

[Bob Denman]

Will order the links before the end of the Month... :thumbup:
(Hope that the bike, beats them here!)

 

[viperryder]

Old Heim's

If you have ordered a set of my Billet Aluminum Heim Joint Links, and you would like written installation instructions let me know. I will email you a set or mail a set if you prefer.

These are very easy to install. But at the same time it never hurts to be prepared. I worked up install instructions for these little beauties today so they are Hot off the Presses!

Should these be replaced on a 2011? Thanks

 

[Bob Denman]

Should they? :dontknow:
How important is it to you, to have the best possible components on your bike?
It was the 2013s that actually had breakage issues...

 

[Dan McNally]

If you have ordered a set of my Billet Aluminum Heim Joint Links, and you would like written installation instructions let me know. I will email you a set or mail a set if you prefer.

These are very easy to install. But at the same time it never hurts to be prepared. I worked up install instructions for these little beauties today so they are Hot off the Presses!

Oh, sure! After I put a set on my '13, now you are AUTOGRAPHING 'em!!

These are not actual autographs . . . it is a designation so you can tell if the link is for the northern or southern hemisphere . . . the folks in Australia need the bottom one. Ron inadvertently sent me one of each, so I have to install one of them upside down!

 

[Bob Denman]

Yours look good to me!! :thumbup:

 

[BajaRon]

These are not actual autographs . . . it is a designation so you can tell if the link is for the northern or southern hemisphere . . . the folks in Australia need the bottom one. Ron inadvertently sent me one of each, so I have to install one of them upside down!

It has to do with the Coriolis Affect (moving objects when they are viewed in a rotating reference frame), south of the Equator. The rotational coefficient must be synchronized with the effects of being 'Down Under' or the lateral stresses created will crystallize the atomic structure of the components causing possible failure of the system.

It's all quite elementary....

 

[Dan McNally]

I knew there had to be a simple reason! :roflblack:

 

[BajaRon]

I knew there had to be a simple reason! :roflblack:

It is great to have comedians on this forum! :thumbup:

 

[kyspyder]

It is great to have comedians on this forum! :thumbup:

Yes it is !!

Too bad there aren't any

KYSPYDER

 

[Bob Denman]

A lot like this; right?