• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

If your Spyder will not find Neutral, try this!

Poasttown

Member
Just a comment concerning my 2019 F3L. Hopefully this will save someone some time if they experience the same thing. I could not get my bike into Neutral. In either direction, First down or Reverse up, Neutral was always skipped. Later, I noticed the Reverse button did not completely return to the up position after putting the bike into Reverse gear. The button became a bit off center and was stuck on the housing, preventing it from completely returning to its original position. Pushing the Reverse button down and over, allowing it to return to its normal center position, seemed to fix the problem.

Not sure why this happened in the first place, but I will continue to keep an eye on it to see if it occurs again.

Poasttown
2019 F3L
 
Not sure? Well, the Reverse Button, like the Hazard Flasher Button, is already a tight fit in the hole. Over the years, a little grit gets lodged in there and interferes with the operation both ways. A little compressed air and a small bit of lube around the button once in a while, works wonders. The switch electrical contacts themselves are sealed against the elements. You can't hurt it... within reason. Plus, it helps to push the buttons vertically and not sideways.
 
Thanks Snowbelt. Now that you mention it, I may have had bulky gloves on when I first pushed the R button preventing me from being so graceful and deliberate in my action.

Poasttown
2019 F3L
 
Not sure? Well, the Reverse Button, like the Hazard Flasher Button, is already a tight fit in the hole. Over the years, a little grit gets lodged in there and interferes with the operation both ways. A little compressed air and a small bit of lube around the button once in a while, works wonders. The switch electrical contacts themselves are sealed against the elements. You can't hurt it... within reason. Plus, it helps to push the buttons vertically and not sideways.
What do you recommend for the lube?
 
Back
Top