Who has the Forward/Reverse Jockey Shifter on your Ryker?

[Markubis]

Looks like either a 5/16 or 3/8 to me. You can measure the width to be sure. The pitch for the 5/16 is either 18 or 24 and a 3/8 will have either 16 or 24. You can check pitch by laying a tape measure along the threads and counting how many threads are in the length of one inch.

I'm positive that a 5/8 inch diameter rod was not used for the jockey shifter.

 

[Beanz1]

I used the short rod to see if it was the same size as the bike shifter rod to fit the nut.:thumbup:

....