Jack point?

[Campverdefela]

I want to swap out my front wheels one wheel at a time, so where do I place a standard floor jack?

 

[sinkhole]

jack points

On the underside of the bottom frame member there are two holes. I made a circular 3/4" wood disk with a 3/8" short bolt protruding above the top about 1/2" and insert it into the cup of the jack. This stud will position the jack in either location and prevent the jack from slipping on the metal frame. To raise the front only, jack at the forward hole.

 

[wyliec]

Here-
http://www.spyderlovers.com/forums/showthread.php?t=21738&highlight=jacking+spyder

 

[Campverdefela]

Here-
http://www.spyderlovers.com/forums/showthread.php?t=21738&highlight=jacking+spyder

Thanks, I remember this thread, but can I just put the jack on the suspension behind one of the front wheels and do one at a time?

 

[Lamonster]

Thanks, I remember this thread, but can I just put the jack on the suspension behind one of the front wheels and do one at a time?

Yes :doorag:

 

[Motavar]

+1 I missed the previous thread you had with the atv/motorcycle jack from HF. Going to pick that up soon. Looks like it makes things easier than a low profile lift.