• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Should I Toss the leaky rear suspension air bag and go with a shock upgrade?

greer

Well-known member
The stupid thing loses air just every couple days, seems like. Shock Factory is well-regarded in the two wheel world, and we were pleased with their shocks on a couple of Moto Guzzi's we owned. I know it's common to add Slime to the air bag, so it makes sense to try that first. But I'm sure pondering.

Sarah
 
Where the air is going is the trick and the only way you're going to tell is soap and water, then you can fix the problem or can the system and go to an aftermarket shock! Is it on your Canyon? I see you have the base, get in there and see where the leak is, maybe it's just a fitting, easy fix! But the new shock will fix your issue once and for all!!! They should get rid of that whole air ride system and put a GOOD shock on there instead!!!
 
Last edited:
Chasing an air leak can be huge head ache and very time consuming if you don't catch it on the first try. I went with a new non air system and it was the best and simplest for me.
 
My bike is a 2025 Canyon Base. I inflate it to 18lbs and it falls to 6 within a couple days. I’m not sure how much I feel like fighting with it. I’m eyeballing Shock Factory.


Sarah
I think you're heading in the right direction, but checking to see if you can find the leak really isn't as hard as one might think! 18lbs even riding solo seems a little low, and by doing that you're putting more of the load on that lame shock they put on there! You're looking into a UK built shock, got to ask do you have a shock shop that rebuilds them by any chance, because when they have to freshen up or repaired you will be waiting for them to come back, plus the extra cost of tariffs and shipping and handling, something to think about! I have a good friend who works on shocks, he looked at the front set I took off my S2S and shook his head. Spend the better part of $30G's and get a nonadjustable piece of crap, wth!! Good luck, you'll figure it out! :cool:
 
Sarah, I own a 2025 Canyon base like yours. According to the chart on the frame my air pressure should be 5 lbs with just a 175 lb rider and no passenger. I removed my rear seat and some weight (because I never have a passenger) but have have added the weight of side and tail cases and their contents so when I extrapolate additional load based on the chart I come up with a goal weight of 7-8 lbs. I check my airbag pressure every time I check tire pressure; weekly as a rule or when there is a substantial change in air temperature. Without the rear seat it is easy to remove the luggage plate and check airbag pressure. I generally add 1-2 lbs to the air bag and a similar amount to the tires. On a percentage basis the loss of pressure in the air bag seems similar to my tires. Although I don't know what passenger or gear load you carry, 18 lbs seems higher than necessary and perhaps 6 lbs is the "happy place" for your suspension. Presumably higher pressure would leak down faster than lower pressure.

All that being said, the loss of pressure from your airbag would be expected to be similar by percentage to that of your tires (if there is no substantial leak). Were it me, first I would check to see if the stem in your Schrader valve is snug and not leaking; a little spritz of soapy water can confirm this and a tire stem tool makes snugging the stem easy. Second, I would spray the other connections between the valve and airbag the same way; a little more fiddly than the stem, but it's doable. And third, I would report this to your dealer and ask them to assess it under warranty before you drop a bundle on new shocks.

With the current system using an adjustable manual air bag you have the "luxury" of adjusting your preload and ride height relative to design according to your desire; this is not an option with the automatic compressor on other models. This is one of the reasons I selected the base model rather than the XT or RR when I purchased mine.

Good luck.
 
Is this the same type of air suspension system as on my 2014 RTL? I've had no problems with mine but I seem to remember others did and someone was selling a cheap fix for keeping debris away from the bladder. I'm surprised BRP hasn't provided a solution of its own by now.
 
I don't know that Slime is a good idea in the air bag system other than possibly a last resort. We've found that many times, (as mentioned above) it is a leaky Schrader Valve or other fitting. Running the system empty or too low on air leads to damage of components and ultimate failure of the system.

Though it can be a bit of a pain to check each fitting. It is worth the effort as a correctly functioning air ride system is quite effective and replacement is expensive.

We pump the system up and use Windex on the fittings. The Windex foams profusely if there is a leak and makes it obvious. If the system loses air immediately it’s usually a blown air bladder and the system is toast.
 
Thanks, everybody. I checked the valve stem early on, no leaks there. From reading on the forums and groups it’s my understanding that the connections don’t seal the best and tend to leak. I’ve been too lazy to investigate but I know that should be the first step. I carry our tools, compressor and all, on every ride, so I tried to choose a setting that was near two-up and figured that would cover my luggage, too. I’ll admit I may be looking at the chart all wrong. I don’t have money burning a hole in my pocket so I’m not in any sort of rush. I appreciate the input, and I'm happy to hear more.

Sarah
 
Sometimes I think they are in a hurry putting the fittings together, if you cut the hose and trim the sharp edge off the end and make sure you put it all the way in, they work very well and you shouldn't have any problems after that! It seems like from what you're saying it's a very small leak, I would put like 40lbs of air in the system and do your test! The bag can take 90 psi! Good luck!
 
Back
Top