What did you do to/with your Spyder today?

[Snoking1127]

This morning I addressed an issue that I had been ignoring. The original owner installed a belt roller, and it was not aligned correctly on the belt. So I just removed it. Maybe someone knows who the supplier was for this? I may want to get a new roller and reinstall it aligned correctly. The Arm is plastic/fiberglass?

 

[CloverHillCrawler]

I installed the replacement Left hand Multi-switch and tested good, Filter from Ron came in yesterday so I changed the oil to get the oil that was in there out.

I ran it pretty hard in 1st gear when the switch was not shifting, it kept getting hot and I would have to stop and idle to let the fans cool it back down before I could keep going.

It only had 3k on it but I changed it out since it was hot.

Tomorrow, I will start cleaning and waxing the panels as I put them back on.

I find it easier to get the scratches out and wax them while the panels are off, plus you don't have to go around with a spudger wrapped in microfiber cloth to get the wax out from in between the panels.

 

[Dakotaz]

This morning I addressed an issue that I had been ignoring. The original owner installed a belt roller, and it was not aligned correctly on the belt. So I just removed it. Maybe someone knows who the supplier was for this? I may want to get a new roller and reinstall it aligned correctly. The Arm is plastic/fiberglass?

View attachment 257559

That is how the belt roller arm on my wife's 2021 RT looked. Pulled it off and there was a BRP part number that is no longer in use. It says on hers 'Made in Canada'. The part number for hers was on the top of the arm non roller side and by the joint where the bolt goes through connecting the metal and plastic arm. Small print.

 

[CloverHillCrawler]

Finished up placing the panels back on and the wife and I went out for a ride after I did a test ride.

We went up and drove the Gettysburg battlefield auto tour loop and came back home. Chilly ride.

 

[UtahPete]

Finished up placing the panels back on and the wife and I went out for a ride after I did a test ride.

We went up and drove the Gettysburg battlefield auto tour loop and came back home. Chilly ride.

I have fond memories of bicycle trips a gf and I took to Gettysburg. Lots of secluded, shady spots.

 

[mecsw500]

I didn't do anything to the Spyder, but I bought some thermals at Costco as it's getting colder now.

 

[CloverHillCrawler]

Lots of secluded, shady spots.

That pretty much describes most of South Central Pa.

This is my favorite spot during the week. A lake on top of a mountain with maybe one or two other people around.

 

[UtahPete]

I didn't do anything to the Spyder, but I bought some thermals at Costco as it's getting colder now.

My wife brought home a battery powered vest by 32 Degree on her last trip to Costco. She wants to increase my chances of safely traveling to LV next month for the 28k service, tire change, etc on the Spyder. We used to have a nice Aluma trailer for things like that, but I sold it 3 years ago so the Spyder doesn't go anywhere now that isn't under its own power.

 

[Elqueso2]

I put the Slingmod's heated passenger backrest on for my spousal unit. She just loves it. She hated the stock backrest.
I also swapped out my old Kenda tires for the front Vredestein Quatrac's in 165/60/15 & the rear for a General Altimax R45 Tire in 205/60/15. My front Kendas still had 1/2 the tread left, but I just hated they way they tracked and handled.

What a difference between the Kendas and new tires! It's like night and day. Ride and handling is just amazing and it is a game changer indeed. Thank you to all the folks who commented/suggested on my other post regarding these and the Conti's. I really appreicate you all!

Funny thing: I've had the Spyder for a while now and I have just been riding it a lot. I haven't had to clean it much and I thought (silly me) that my rims were flat gray in color. Turns out that my buddy who sold it to me just never cleaned the wheels. So to my surprise, when I washed the wheels before having the tires mounted, the rims were gloss black! I've been doing so many mods to the bike, I never paid attention to the wheels other than just adding air and watching the wear on the tires. Yeah, I know, I have my moments... LOL

-

 

[Deanna777]

Nothing. It is on a battery maintainer until April 2027. It is in hibernation.

Deanna

 

[blacklightning]

Nothing this past weekend, but my cousin had mentioned coming over today to get a ride in. But wouldn't you know that as soon as I checked my emails, I got an invite for a zoom meeting that I have been waiting on for weeks. So it looks like today will be a working and not riding day.

 

[hogmemberisold]

Got the rough stainless part done and mounted, both sides. Wife will try them for a bit and then I'll work on dressing them up a bit.

Thinking about wire brush finish and then trying some stainless steel blackening. If that looks okay, then a clear coat for protection. Oh, after cleaning up all the welds...