• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Foam Grips

Rockytime

New member
I'm looking for foam grips for my 2010 RT-S. I am looking for grips that will fit over the existing grips to give me a little larger diameter. I presently have the Throttlemeiser on my grips which should not interfere. Maybe foam paint roller covers ? Yellow ones? :>) I am sure I have seen posts about these before. Ebay has hundreds of grips but I have no idea which ones will slip over. Any ideas will be appreciated.
 
Have to agree ref Grip Puppies

Fitted them a couple of months ago on my Spyder RT -S SES Model

1 - Fitted without any problems - Easy install
2 - Less fatigue on hands and they give a much more positive feel for the throttle control
3 - No problem when they get wet - In fact you can still feel the heat from the heated grips and can use the heated grips to dry them out
4 - Original grips will never need replacing as I will just replace the Grip Puppies

I rate them and highly recommend them

Hope this helps

Eddie Sheppard
Reading UK



Spyder – RT-S SES (AUTO 2010 Model)


List of Mods :-
Added Zuno 660 -Garmin kit as supplied on the Spyder RT Limited
Digital Voltmeter and Digital Clock to replace Fuel and Temp gauge – Fuel and Temp now
displayed in Cluster Display
LED Bulbs Reversing Lights,Front position lights
HMT - Brake Light
LED – Running lights
LED - Mud Flap lights
Rear extended Mud Flap
Sport Tall Wide Clear Windshield
Chrome 2011 Front Lower Wind deflecors
Utopia Backrest
S/S Seat Prop
S/S Handlebar Weights
S/S Grills both sides matching
Bottom Panel S/S Protection
S/S stronger Funk Lid brackets
S/S Bracket for RBNS Hood for Zumo 660 GPS + TourTech Lockable Mount
Rubber Tank protector on glove box
Grip Puppies
Power Socket in Switch Cluster and at Rear passenger Handrail
Rear Speaker Switch for passenger On/OFF
Upgraded Front Marine Speakers
Bluetooth On board Radio to Sena SMH10 Headsets
 
They really do work and as winter approaches I took them off till spring and put on the Oxford "Hot Hands" Wraps and they do almost the same thing with :"HEAT!" :2thumbs:
 
I am going to get a set of Grip Puppies. Any secret in installing them? Thanks in advance.

:spyder2:


Cut the length to fit with scissors, then a wet the inside of them with water/and slight soap and work them on. Dont over soap.

Also, the heated Spyder grips comes thur mine fine. Gets very warm
 
They really do work and as winter approaches I took them off till spring and put on the Oxford "Hot Hands" Wraps and they do almost the same thing with :"HEAT!" :2thumbs:


Heat comes thur my grip puppies very well. Can get almost too hot on high setting.
 
Back
Top