ST LIGHT BULB OUT - What's the part #/replacement? Is it easy to change myself?

[Raprap]

I own a 2013 Spyder ST Ltd. The left headlight has burned out (the dim bulb, the bright still works)
What replacement bulb do I use to replace it? I called the parts department at my dealer and the parts
guy asked me what the bulb # was. I am thinking that if it's a common bulb, I can save money at an auto parts
store. Also, is it easy to change the bulb myself or should I bring it in to a dealer? Thanks,

RAPRAP

 

[billybovine]

It is an Osram part number 64193. Just look in the lens and read the number. I believe it is equivalent to a H9003. Ask your parts guy and make sure.

If you are going to replace it yourself. I recommend getting a service manual. You have to remove the gauge cluster to get at it.

 

[SpyderAnn01]

Isn't it just a single bulb? The shutter is open and you have bright lights and it closes and you have low beam. It may be that the OPs shutter is not dropping, I had that problem on my 2010 RT. The bulbs are available at auto parts stores for significantly cheaper than what the dealers charge.

 

[billybovine]

Isn't it just a single bulb? The shutter is open and you have bright lights and it closes and you have low beam. It may be that the OPs shutter is not dropping, I had that problem on my 2010 RT. The bulbs are available at auto parts stores for significantly cheaper than what the dealers charge.

No shutters on a ST. Dual filament bulb.

 

[Chupaca]

Good to know..!!

was thinking they were all alike using the H7 single bulb. Did they all change or only the ST's 2013..?? :gaah:

 

[billybovine]

was thinking they were all alike using the H7 single bulb. Did they all change or only the ST's 2013..?? :gaah:

Only ST's, all years are this way.

Edit: I forgot about the F3. They have the same dual filament bulb as the ST.

 

[SpyderAnn01]

No shutters on a ST. Dual filament bulb.

Wow, you learn something new everyday. I wonder what the F3 has for headlights. I know that they are really bright, much more so than the RT lights.

 

[billybovine]

Wow, you learn something new everyday. I wonder what the F3 has for headlights. I know that they are really bright, much more so than the RT lights.

I forgot about the F3. Just looked it up and they take the same dual filament bulb as the ST.

 

[Raprap]

Thanks for the replies. I found out thru a dealer that the Can Am part # for the replacement headlamp is 515176274.

Michael

 

[photophil33]

2013 ST headlight bulb

What is the corresponding number of the headlight for a 2013 Spyder ST, if bought from a parts store (H7, H5, 9005, etc.)?

 

[billybovine]

What is the corresponding number of the headlight for a 2013 Spyder ST, if bought from a parts store (H7, H5, 9005, etc.)?

You must not have read post#2. H9003

 

[ARCTIC]

You must not have read post#2. H9003

H4 is what xenon depot posted on their thread. Are these the same bulb?

 

[billybovine]

H4 is what xenon depot posted on their thread. Are these the same bulb?

H4 is actually the base type and can cover more than one bulb. H9003 is the matching replacement bulb for the ST which has a H4 base. On the Xenon Depot web site it does say their H4 bulb replaces a series of bulbs including the 9003.

 

[900Dave]

You must not have read post#2. H9003

BRP likes this bulb. I just noticed that my 2 Ski doo's have the same bulb as my ST.